Question about Canon BJC Office Equipment & Supplies
head is installed. The error is occurring because the printer no longer recognizes that a print head is installed. Normally , this is due to a defective print head. If you have replaced the print head
Question about Canon BJC Office Equipment & Supplies
...head is not installed correctly or not installed or is defective (before buying a new print head always try the cleaning instructions at the end of this post first.) * six flashes means the inner ...
Question about Canon BJC Office Equipment & Supplies
...Printer worked couple of yrs ago. Unused since. Loads paper fine, no errors. Replaced BC-10 new head and new BCI-10 ink cartridge. Head travels back and forth like normal, but nothing on paper. ...
...printer is 6 years old--are parts worn out --help please you can try this to really clean the print head: Canon will hate me for this. 1. Remove ink cartridges. 2. Remove print head. 3. Go to sink or ...
...installed also. 1. Clean your print head using denatured alcohol solvent which can be purchased from most hardware stores. If unavailable, use 91% Alcohol (isopropyl alcohol (first aid antiseptic) ...
can the print head be replaced?I have an older printer that hasn't been used in a while. print quality is really bad, i've put new ink in Yes it can be replaced, but this is often unnecessary. Printer
...installed a complete new cartridge (ink plus head). Still no solution: all seems to work as normal, but no ink gets to the paper. It surely isn't the driver: I have used the buttons on the printer ...
...installed the new cartridges, I held the c. button for several seconds to clean the print head and got no response. I also pressed the resume button and still nothing. I have tried turning off the ...
...see below 6 times Print head not-installed error Install print head. 7 times Print head error Replace print head, as it has failed. 8 times Waste ink near-full error Replace printer, as it has
installed. Check printer properties to see the ink levels. Use head cleaning before a test is taken . It is possible that the head is not reacting to the need of the command , can be an issue with ink
52 questions posted
Usually answered in minutes!
110 Questions
71 Questions
50 Questions
50 Questions
44 Questions
