Question about Canon Office Equipment & Supplies
...tray (trays 2 or 3) > Open the tray and verify that the media stack is below the maximum stack-height mark. The paper is sticking together > Remove the media, flex it, rotate it 180 degrees, or ...
Question about Canon Office Equipment & Supplies
• Worn or contaminated pick tires • Overfilling of tray past the fill line. Solutions --------------- 1. Fan media. 2. Turn media over. 3. Reduce amount of media loaded in tray 1 4. Replace pick tires
...tray 2 works fine what have we done and how can we fix it. Thanks Make sure that you don't have too much paper in the tray. There is an overfill idicator on the back of the tray. Push the tray in ...
Question about Canon Office Equipment & Supplies
...the paper tray 2. put the printer on a hard surface (not on a half out surface) 3. from now on be gentle with the paper tray. 4. unplug the printer everytime u r done or atleast overnight. ...
...tray. 2 Turn off the printer. 3 Open the rear access area and pull the paper out from the rollers without tearing it.. 4 Reload the paper tray, but do not overfill it. 5 Turn the printer on. 6 Press ...
Question about Canon Office Equipment & Supplies
...2. Tray 2 or tray 3 is removed during print job. 3. The top cover is opened during print job. 4. The media that is being used does not meet HP specifications. 5. The media that is being used is ...
...2 by 11 inch paper in the normal feed slot. Take most or all of the regular paper out of the tray before setting the photo feeder onto the front of the paper slot. When installing the photo feeder, ...
2.Lift any covers and lids, and wipe the rollers with a soft, damp cloth. A light colored cloth will help you identify dirt that comes off the rollers.3.Use fresh paper for your printer. Use dry, flat
Question about Canon Office Equipment & Supplies
...Tray#2) or MP(Multi-purpose) Tray.Resetting the Brother machine may resolve this issue. To reset the machine, unplug the power cord from the AC power outlet for approximately 10 seconds and then plug ...
...Tray 1. Open the front cover and make sure the kickstand (if there is one) is engaged. 2. Locate and remove any obstructions within the printer, such as paper pieces, staples, tape, or other objects. ...
247 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions