Canon imageCLASS MF5530 All-In-One Laser Printer "wont pick paper" Questions

pick causes paper jam..2.Registration assembly area: Once paper picked from the tray, paper leading edge registered by the paper sensor located under the registration assembly.. In case this

but it wont feed to the printer. Just keeps showing "out of paper" observe if pick up mechanism function as when you send printing job. if yes, may pick up roller already worn out and need replacement

...wont pick up paper... cleaned as much as I could... There are a lot of conditions that cause the red light to come on. These include toner cartridge empty, paper jam, waste toner tank full, etc. The ...

...wont pick up the paper to print it And then send the code 075-134 Most printers have rubber wheels that pick up paper. These sometimes get caked up with paper dust and stop picking up paper. Take a ...

...to be printed it wont grab it happens in both tray 1 & 2. Please help The printer don't pick-up the paper, the cause is dirty roller. You can clean pick-up roller with a wet cloth with

...wont take paper The paper pick up fingers and rollers get smooth and polished with use and then slide on the paper. Clean the rollers and pick mechanisms with isopropyl alcohol to rejuvenate them and ...

wont feed paper The paper pick up fingers and rollers get smooth and polished with use and then slide on the paper. Clean the rollers and pick mefchanisms with isopropyl alcohol to rejuvenate them and

...wont's pick up the paper at all or sometime pick up one side but not the other wich makes the paper go in crooked and jam Clean the rollers with a cloth moistened with alcohol (preferably rum)...just ...

wont pick up paper even though the paper tray is full Printer started picking up paper from one side only, creasing the paper, then stopped picking up the paper completely, stating that the paper tray

...tray, bypass Canonj imageclass mf5530 jams from paper tray, bypass works ok Clean the pick up roller, try to see where is stuckes. In some cases the roller holders breaks down and roller wont