Canon imageCLASS MF5550 All-In-One Laser Printer "change paper size" Questions

...have 'letter' size paper in the tray and the menu system is set for 'A4' paper you will get this message. Either put A4 size paper in the tray, or change the paper size in the menu system to

...what size paper you are using and change the printer preference to match. For me, my paper size was LTR but my preference was A4, once I changed the printer preference to LTR, the problem was

...Change to the previous settings again if necessary. When making copies of a small size or heavy paper*, etc., the copy speed may be slightly slower than usual. *The paper type should be selected in ...

...CHANGE PAPER SIZE CASSETTEL LTR. please guid me through steps. thanks!! Chances are the paper size in the cassette doesn't match the paper size (or alignment) that you've tried to print. Verify the ...

...change paper size. Message come up to check paper size and change paper size to A4 eventhough A4 paper is in machine. Also says cassette : LTR even though all is set to A4 Tks. Pat yo tengo el mismo ...

...change paper size my canon keeps sending that above message. Do you please have a solution to help my printer? Thanx Go to the queue of print documents and continue deleting them until you get a ...

...The printer may have a setup for a region which will change the paper size. Also the paper tray may need to have the paper size adjusted on it physically. Save the paper size in the preferences to

...paper or change the paper size in <PAPER SIZE> for <CASSETTE> or <MP TRAY>. Check if the size of paper loaded in the paper cassette or multi-purpose tray meets the paper setting ...

paper cassette side rails. They're in Letter Position. You need a screw driver to change to A4 width. Hi, please get new driver here: www.driversdown.com/ www.nodevice.com/driver/company/Canon/Printer

...change the paper size to letter it automatically resets back to legal and will not print Have you checked to make sure your paper guides in the paper tray are set correctly? If so then you might need ...