Canon MF3110 All-In-One Laser Printer "current size message" Questions

...your current font settings. Make all desired changes and click "OK." Your selection will take effect immediately. To change the font size of other browsers, please refer to your browser's help

...Size is set to Universal, make sure your paper is large enough for the formatted data. • Press Menu to open the Job Menu and cancel the current job. Please see also the media guidelines on the user ...

message load mpf 024-969 This error typically means that the Size of paper defined in the print job being sent from the application does not match the size of the paper the printer has set for the MPF

...current character size. Keep the "Code" key held, and press the "Size" key until the desired size is displayed. If you select "AUTO", the P-touch machine will automatically adjust the character size ...

... touch the appropriate size key. ? To change the displayed size selections to AB sizes, touch [AB ↔ INCH]. Message will appear asking you to check the paper in the tray. hope this helps! ...

the printer setup menu to Letter (it may currently be set for A4). If the setting is the same as the paper size in the cassette, and you're still getting the message, you may need to have it looked at

...current tray 1". We then press the check button and the print job then prints. If we print something else immediately, it will print. If we wait say 30 seconds or more to print, the error messages ...

...size in current tray or touch OK to change the tray. To resolve this issue Touch OK to display tray size. Reconfigure the size in the tray so that it uses size of media required for the print job. If ...

E07 code. Open the drawer the printer is currently pulling from when the error message "E07" appears on the display. Verify that the paper in the drawer is the correct size and close the drawer firmly

...Size is set to Universal, make sure your paper is large enough for the formatted data. ? Press Menu to open the Job Menu and cancel the current job. Please see also the media guidelines on the user ...