Question about Canon PIXMA Office Equipment & Supplies
...wait, and plug back in, the power light comes on momentarily, then goes out again. Same problem here with IP4000. Power light comes on for a second and then dies. Let me know if you get a
Question about Canon PIXMA Office Equipment & Supplies
...power. Dear Mmally1323, You said "My Canon PIXMA iP4000 will not turn on. Printer was working great until i went to turn it on and there was no power." First off make sure that your powre cable is ...
IP4000 powers on for only one second and then dies From the service manual, this complaint is caused by a power supply problem. To repair, one needs to replace the power/logic board. This requires ...
Question about Canon PIXMA Office Equipment & Supplies
...ip4000 power button keep flashing 1 green & 5 yellow flashes. What is wrong ? It may indicate a printhead error. Look at the followng instructions at the Canon website: ...
Question about Canon PIXMA Office Equipment & Supplies
...ip4000 - green power LED indicator flashing orange, Says cancel all printing, turn of then turn back on, should be ok - but isnt - error code 6800 coming up - What does this mean? - Frank Summers ...
Question about Canon PIXMA Office Equipment & Supplies
...power supply in my iP4000 and would like to know the connector voltages (preferably when active and in standby). I would also like to understand the function of the control pin. I have looked around ...
Question about Canon PIXMA Office Equipment & Supplies
...ip4000 won't turn on ink wast tank error came up, so dismantled printer and cleaned the blotters. Then reassembled and reset the ink waste code. That went like clockwork, but now the printer won't ...
Question about Canon PIXMA Office Equipment & Supplies
ip4000. It's not obvious to me; could someone please tell me how to do that? Thank you. When you open your top cover (with power on of course) your print carriage will move across to the centre of the
...IP4000, but am getting an error code 5100. I cancel the print, turn it off and on and retry (as it suggests), but still the same error happens. Any ideas? It is a carriage error. Most times this is a ...
...ip4000 flashing 8 time 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let BOTH ...
37 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions