Question about Canon imageCLASS Office Equipment & Supplies
...Reset] to return to the standby mode. I have an ooma telo and canon mf4150 fax machine. I have a main line and a 2nd dedicated fax line on my telo. I have a 3-way splitter on my telo phone port with ...
Question about Canon imageCLASS Office Equipment & Supplies
phone line is still securely connected to both the L (line) jack on the machine and the phone jack in the wall. If it is, plug another phone into the accessory jack on the machine, and check to see if
...reset it to tell the difference between a phone call ringtone and a fax ringtone? The only way I can receive a fax is to change it to fax only. get distinctive ring service from your phone company, ...
Question about Canon imageCLASS Office Equipment & Supplies
...the analog phone rings. Once you know the line and connection is okay, let's reset your fax machine. See http://www.fixya.com/support/t2503076-hp_laserjet_m2727nf_mfp for the cold reset
...reset the memory and the DIMM chips as suggested by Xerox. The phone line works as the machine can fax out. Help please Is your phone line in the " line" jack and not the ext jack? If the line is ...
...other power-related problems. Disconnect all phone lines and wait one minute. Plug in an analog telephone to reset the lines. Re-plug your original phones (and fax) and try faxing again. good idea ...
...phone line so we connected the fax to our phone line. It answered the first time we tried it but then it quit answering. I have run the Fax Setup wizard a billion times and it always resets itself ...
...reset machine, checked phone lines etc. Lost power due to storm, but we have a surge protector. It seems the problem happened right after the outage. The storm has likely damaged the phone line, or ...
...Reset> repeatedly to return to fax standby mode. Try setting your fax machine to DRPD (distinctive ring pattern detection) -Press menu > receive mode settings > ok > scroll down to DRPD > ok > back ...
...phone line plugged into the Officejet machine First reset all settings of fax configuration to defaults. Then set fax auto answer enable. Make sure your phone line is give proper voltage. Then check. ...
150 questions posted
Usually answered in minutes!
352 Questions
238 Questions
127 Questions
154 Questions
139 Questions
