...cannon copier I have a code flashing...it says "waste ink near full". Any suggestions? thank you. You need to have the waste ink absorbers replaced, the cost of the absorbers should be around $20.00 ...
...replace the print head on Sep 02, 2004. The Canon part number is QY6-0034-010 and their phone number is 1-800-385-2155. I paid $56.23 back then. Just last week I got the "check printer" error code. I ...
Question about Canon Office Equipment & Supplies
...pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error. The waste ink absorption pads cannot be emptied, only replaced. Replacing the ...
Question about Canon MultiPASS Office Equipment & Supplies
...pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error. Replacing the waste ink absorption pads is something an authorized canon ...
...web sites that will show/describe how to reset the waste ink counter. The real issue is whether or not it is worth disassembling the machine to clean/replace the pads in the bottom of the
Question about Canon Office Equipment & Supplies
...8. Replace the Ink cartridges. 9. Power on the printer and print a test page and clean and realign the heads as required. 10. If the E27 error message reappears then you will need to reset
...CANNON PIXMA MP170 AND IT KEEPS SHOWING THE MESSAGE WASTE INK FULL & CODE 5800 ... BUT I NEED TO USE THE PRINTER URGENTLY... PLEASE ADVISE.... MANY THANKS.. Hi: The problem here is the waste ink ...
Question about Canon Office Equipment & Supplies
...Cannon Pixma iP90v IT means that the pad in the printer that absorbs excess ink is full. This costs a lot of money to replace, probably more than you paid for the printer. Just resume
...Cannon MP180 printer will not print is says that my ink absorber is full. What do I do? The waste ink absorbers are pads that absorb waste ink during head cleaning cycles. One set of pads is below ...
Question about Canon MultiPASS Office Equipment & Supplies
...REPLACE OR CLEAN THE INK ABSORBER FOR THE IP1800? Hello,to replace it you must take it to cannon service,to clean it you can try Opening your printer,but first wear glove to protect your hands,locate ...
365 questions posted
Usually answered in minutes!
427 Questions
121 Questions
111 Questions
109 Questions
81 Questions