Canon imagePROGRAF W8200 InkJet Printer "initialize selected paper source" Questions

...Paper Source] button and [Online] button. 3) Check that "Canon W8200" is shown on the display, and then release the buttons. 4) Next, "SERVICE MODE" is shown on the display. (If sheets are inserted, ...

...paper source to clean. 3 Clean the paper feed rollers. (1) Select Settings on the HOME screen. See Basic Operation for the Operation Panel. The Settings screen is displayed. (2) Select Maintenance, ...

paper source and each menu individually. Before using the TOF function (if fanfold paper is used), you should first set the tear position (see above). Press the Setup key. The printer changes to setup

...paper source for the Nozzle Check is selected on the unit by changing the if necessary. Select 'Nozzle Check'. Memo: By clicking 'Initial Check Items' before clicking 'Print Check Pattern', you can ...

paper in the printer you will need change the main motor drive if it fails to initialize this is the error that will show up and there is no other way to reset it Open the printer paper tray (tray 1),

...paper size is selected, look at the file you are tyring to print and see what size of paper it looks like on the page. Check your margins to see if it is set for a typical 8.5 x 11. page. If the page ...

...paper towel. Unplug printer from power source, plug it back in after 10-15 seconds. When the printer's ready, reload one cartridge first. Close the cover, check if "out of ink" message is displayed. ...

...paper stock selected. Then, as you prepare to send the job from the app to the Queue before you hit the final "Print" button, check the "Paper Source/Size/Media" boxes in the "Printer Properties" to ...

...Paper Source/Feeder Selection] button and [Information] button until Initializing appeared in the display. An "S" will appear in the upper right of the version display. Power down and do a normal ...

...paper source and select Custom Size for the paper size, enter the width and height values of the desired custom size paper in the Width and Height boxes. The values for width and height are initially ...