Question about Canon PIXMA Office Equipment & Supplies
...output tray closed when it is open When trying to print getting message saying 'Document printing cannot be executed because the paper output tray is closed'. the paper output tray is open. lift the ...
Question about Canon PIXMA Office Equipment & Supplies
...output tray is open but message says it is closed Canon PIXMA iP4000. Used compressed air to clean both door position switches but problem remains. Works OK for about 1 in 20 print attempts. I solved ...
Question about Canon PIXMA Office Equipment & Supplies
output tray. 2. Open the top cover and wait until the print head moves to the center. 3. Open the inner cover and check that ink tanks are properly seated. 4. Properly seated 5. Press down on each ink
output tray. If you see only an inch of paper poking out--or none at all--chances are there's some ugly stuff going on in the inside of the printer. You don't know until you look inside whether a part
output tray. If you see only an inch of paper poking out--or none at all--chances are there's some ugly stuff going on in the inside of the printer. You don't know until you look inside whether a part
Question about Office Equipment & Supplies
...output trays are: Internal Tray 1 (basic configuration) External Tray Internal Tray 1 Internal Tray 2 Upper Tray - 1000-sheet Finisher Shift Tray - 1000-sheet Finisher Shift Tray 1 - 2500-sheet ...
Question about Kyocera Mita Office Equipment & Supplies
..., you do this by pressing menu buttom, and change the output paper to the internal finisher. Let me know wat happen after. You need to run sim 906 in service mode to reset the disabled
internal tray 1 is full remove the copy on the display Please you must remove the copies from the output tray. If you don't have copies in the output tray, check for a black lever at the middle of the
Question about Konica Minolta Office Equipment & Supplies
internal error c 1183 code on konica minolta 283 Sir/mam Did someone leave a trash can or boxes under the output trays? To solve this problem requires removal of the rear cover of the finisher. Then ...
Question about Gestetner Office Equipment & Supplies
output tray is full. Remove paper. Internal tray 1 I can't find any tray that is full. Look at the area where the paper just exits from the machine. You should see a small black plastic arm. Make sure
510 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions