...fix this?! Thank you! Calvin If the printer making louder and louder noise you need to replace the purge unit,the purge unit is in the rirth of the printer.An advice...i telling you to go to someone ...
...normally does, takes the paper, and makes the noise that it is printing, but when i look at the paper, not one spec of ink was layed onto the paper. how do i fix it ink abbsober is full canon ip ...
Question about Canon PIXMA Office Equipment & Supplies
...noise, which I think seems to be the roller locking up? Don't know how to fix. When paper is in the printer, it will start to feed the paper then jam. I don't see any obstructions. When turned off, ...
Question about Canon PIXMA Office Equipment & Supplies
...noise as if the gear cogs are slipping. Can I fix it? This could be a number of things, but most likely a part has failed & unfortunately not something that can be diagnosed without seeing the ...
Question about Canon PIXMA Office Equipment & Supplies
...solve this error code i tryed to bypass the code but after two trys the printer power off can it be fixed Yes. Unplug it from AC, wait for 5 minutes (and push power button) then re-plug it. Make sure ...
Question about Canon PIXMA Office Equipment & Supplies
...fix this? Issue: A grinding noise is heard from the device. Solution: Press ON/OFF switch to reset the multifunction device Reset the device when it is not functioning properly. If the device is not ...
...noise/sound. It seems like the printer is trying to grab the paper, but the paper is not going through. Is there a way I can fix this? Has anyone encountered anything like this? Just clean the rubber ...
Question about Canon PIXMA Office Equipment & Supplies
noise but no action, then screen asks to load paper. The feeder on this model has 1 weak mounting place for the gears that drive the feed roller. The plastic stud that holds the gear will break off of
making a loud nouise please please help how do i fix it i already try putting the rubberband back but the noise doesnt go away Before you try this, put a couple of drops of resin-free oil such as 3 In
making a loud chattering sound for a few seconds but it still prints ok. First of all, check to see if you also hookup the phone cable to jack too? If yes, temporary unplug it to see if noise goes off
510 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
