Canon i9900 InkJet Photo Printer "causes print half" Questions

...causes of that problem that I've seen before with the larger M & I class printers can be: 1) A piece of label or ribbon is stuck on the printhead. 2) The printhead is not seating properly on one ...

Copies are half printed and half almost not printed (very lite) Hello, My name is Chris and I have a Ricoh Aficio 2022SP. I put a brand new toner but I am still getting all copies showing half of the ...

...half way through. It does this all the time and has only recently been bought. Sometimes it will print a couple of sheets, sometimes it will get to print one sheet. Very irritating and have so much ...

half how do you clean print head Printhead should be cleaned with a 90% alcohol solution, however that should not cause blurry print. I've seen some labeling programs that will blur part of your label

...half the picture We are trying to print a full size picture and it only prints 1/2 of it the other half is white. We have replaced the ink and have new paper. Help. Most of these issues are caused by ...

...half). What would cause this? it could be the printer settings. Before you actually print something go to File>print:- and then choose properties, click on advanced and ensure that the correct paper ...

...half prints correctly, the fuser rollers are in good condition, just as the drum roll what can be? Thanks How blurry? Like toner can be wiped of or like the letters are verry light? Did you check ...

half the time I try to print. I am running osx 10.6, i have downloaded all the driver updates available on xerox.com and it still has not solved the problem. The frustrating thing is sometimes it will

...Print half way test page.,chk leading edge is same as you noticed?.. If yes: Chk transfer roller, clean it, chk side locks..if required replace it.. If no: chk fuser Teflon sleeve., is there toner ...

...causes. I don't know what printer you have, and that makes it harder. Does it print the top half only? It could be that your computer's disk is nearly full, and it can't hold the print ...