...print head Where do I go to find out how to remove the print head? If you purchased the printer new, you would have had to install the print head before youput the cartridges in. The print head id he ...
Question about Canon PIXMA Office Equipment & Supplies
...Removing the Print Head / Ink Tanks Instructions to properly remove the print head or ink tanks. Remove the ink tanks before proceeding to remove the print head. Remove the Ink Tanks Confirm that the ...
...removing the protective cap, set the print head into the print head holder immediately. Do not re-attach the protective cap after it has been removed. Set the print head into the print head holder, ...
Question about Canon PIXMA Office Equipment & Supplies
...removing the protective cap, set the print head into the print head holder immediately. Do not re-attach the protective cap after it has been removed. Set the print head into the print head holder, ...
Question about Canon PIXMA Office Equipment & Supplies
...print head".First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back ...
Question about Canon PIXMA Office Equipment & Supplies
...print head needs to be removed and washed with warm water, Please check the manual for print head removal and re-installation. Also print head alignment must be done on re-installation. The process ...
...print head error. Reseat the print head, then reset the printer. To reseat the print head, make sure the printer is on. Open the paper output tray and top cover. Make sure the print head holder is in ...
Question about Canon PIXMA Office Equipment & Supplies
...removing and reinstalling the print head. 1. Remove and set aside the ink cartidges (don't make a mess) 2. lift the gray print head lock lever that is to the left of where the ink cartridges go. 3. ...
Print head is not installed When i try to print it comes up Print head is not installed First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on ...
print head is incorrect. Install the correct print head." Why this now, since I've been using the same printer cartridge product for years? (1) Open the printer and wait for the carriage to slide over
597 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions