Question about Canon PIXMA Office Equipment & Supplies
paper feeds crooked, then stops. I can't find the users manual. Do I need to clean the rollers? you may need to replace the rollers. if its feeding crooked it sounds like one of the rollers isnt ...
Question about Canon PIXMA Office Equipment & Supplies
...want to grab the paper? Try cleaning your printer roller. You can do it through computer program or manually. See also if your gear is properly fitted or jammed this might be the reason why it won't ...
...through. Hi there, you will need to reallign the rollers, try searching google for the service manual and it will tell you how to do it :) thanks ...
manual feed slot. 7. Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9.
...manual line feed. If the print cartridge is moving then there is either a paper jam or check to see if anything has fallen into the paper feed roller. Here's the roller cleaning procedure from Canon ...
...feed section into the printer, it grabs the paper brings it in and then backs out and then brings it in fast and shoots the paper out the paper output section. I have attempted to do the alignment ...
Question about Canon PIXMA Office Equipment & Supplies
...OK, WITH THE HOOD OPEN, with a piece of paper loaded in the ADF, being careful to grab the paper manually as it comes out of the bottom of the hood. b) Windex the strip of glass surface which sits ...
Question about Canon PIXMA Office Equipment & Supplies
...manual and found nothing that will help. There is no jammed sheet of paper but the printer thinks there is and I am at my wits end trying to send this problem packing. Has anyone had a similar ...
Question about Dell Office Equipment & Supplies
...Instead it says there is no paper in the tray. Sometimes, if I take a single sheet and feed it manually as it is trying to print, it will grab it and print. I have looked inside and don't see ...
...grabs, it will only feed a short distance as it catches on the teeth inside the machine and won't go any further. I don't think I can load it via the tray as it's 350gsm and won't take the bend ...
597 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
