Question about Canon PIXMA Office Equipment & Supplies
print head align failure will not print black ink The printhead is probably worn out and won't align until you replace it...QY6-0049-000 around $50.00
...that the printhead parks on on the right. Could be just a paper scrap inside, or the gears are worn out. The replacement includes the entire print engine and costs more than a new printer to
Question about Canon PIXMA Office Equipment & Supplies
...print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head ...
Question about Canon PIXMA Office Equipment & Supplies
...worn out. Routine maintenance and keeping full ink tanks will prevent this problem, however if you have the problem you can resolve it by doing the following: 1. Clean your ip3000 print head using ...
Question about Canon PIXMA Office Equipment & Supplies
...print at all. also the Auto Head Align failed It means you either need a new printhead, QY6-0061-000, or the purge assembly is worn out and not cleaning or priming the black properly. You can change ...
Question about Canon PIXMA Office Equipment & Supplies
...Print Head Deep Cleaning finishes. This takes about 1 minute 30 seconds. Now do alignment and see result. If it fails, repeat deep cleaning 3 more times and each time try alignment. Thanks for ...
...worn out gears and dried ink so that replacement of the purge assembly is the best fix. The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a ...
Question about Canon PIXMA Office Equipment & Supplies
...cleaned the heads and the problem is still there. Do you think it's because the head is worn please change your printerhead or clean manual open your printer open head clean alcohol then solve ...
Question about Canon PIXMA Office Equipment & Supplies
Print Head Is Incorrect On my Pixma IP6700D I had been using a Continuous Ink System with the chips from the original cartridges. My first guess was that one of those chips had gone bad, and since the
...print cartridge supplier says my swapped chips may have 'worn out'. Is there a simple check that I can do to eliminate the purge unit as a cause? I have tried cleaning, deep cleaning and print head ...
1,571 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,216 Questions