...the cartridges clip into. So to remove the print head: Open the cover, take out all five print cartridges and then lift the lever on the left of the print head and remove print head. Hope this
Question about Canon PIXMA Office Equipment & Supplies
remove the ink tanks one by one. Click to return to the top. Removing the Print Head Raise the print head lock lever. Tilt the print head slightly towards the front of the machine and lift out gently.
Remove the orange tape completely. If the orange tape is not completely removed, it may interfere with printing. <1> Removed correctly <2> Removed incorrectly Hold the ink tank as shown in
Question about Canon PIXMA Office Equipment & Supplies
Remove the orange tape completely. If the orange tape is not completely removed, it may interfere with printing. <1> Removed correctly <2> Removed incorrectly Hold the ink tank as shown in
Question about Canon PIXMA Office Equipment & Supplies
...remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist you need to replace the print head.It's part ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the print head, wash in warm water carefully, do not use any brush or do hard rubbing, dab dry on paper towel. Replace print head into printer, then cartridges, then switch power on. Do print ...
...holder is in the center and open the inner cover. Remove all the ink tanks. Raise the print head lock lever and remove the print head. Reseat the print head and lock the lever. Replace the ink
Question about Canon PIXMA Office Equipment & Supplies
...head. 1. Remove and set aside the ink cartidges (don't make a mess) 2. lift the gray print head lock lever that is to the left of where the ink cartridges go. 3. Lift out the print head out without ...
...remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist the print head is defective and you need to ...
...head. In this case: (1) Remove the print head from the printer (2) Soak it in hot water for an hour or so (3) Remove it, let it dry completely (4) Replace the print head and cartridges and test ...
1,571 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,216 Questions