Question about Canon PIXMA Office Equipment & Supplies
remove moisture from the contacts. 5. Insert the cartridges back into the printer. 6. Close the top cover. 7. Try printing again. If you still cant communicate try with new cartridge . Hope this help.
...little windex on a q-tip. It's delicate so be careful. If the line looks faded after printing 10 blank pages, some ink has dripped onto something that is contacting the paper. This could be a roller, ...
...little less than 3 years. Could you please tell me what to do? Thank you Li Chen Remove the cartridges and then pull out the print head. Look on the bottom for burned out circuit traces. Canon & HP ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the cartridges. With the printer still open, disconnect the power outlet. 9) Close the lid and turn on the printer. 10) Refill cartridges and place them back in their nice little abode in the ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the cartridges. With the printer still open, disconnect the power outlet. 9) Close the lid and turn on the printer. 10) Refill cartridges and place them back in their nice little abode in the ...
Question about Canon PIXMA Office Equipment & Supplies
...little abode in the printer. Guyz This is 100% WORK Trust Me ! 1. Remove Both The Cartridges. 2. Turn On The Power Supply. But Keep The Printer Off. 3. Press and hold the Reset Button (the one with ...
Question about Canon PIXMA Office Equipment & Supplies
remove the object or wipe the ink away. The only person here giving the wrong advice is - Coach Tim from... you guessed it! CANON! :))) He even managed to change it into a completely different problem
Question about Canon PIXMA Office Equipment & Supplies
...Remove the cartridges from the cartridge carrier and use kitchen paper towel to soak up any ink in the bottom. Give the cartridge outlet holes a dab on the towel as well. Replace the cartridges ...
Question about Canon PIXMA Office Equipment & Supplies
...little issue) If I remove the cartridge, wipe off the excess ink, it is ok for a few prints, then does it again... Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United ...
...remove the black photoconductor and you should be able to see the little lines on it also check the the black dev/toner unit for the lines. most likely to be the black photoconductor unit though. ...
1,571 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,216 Questions
