...blow a fuse. The heating element is simply a long coil of special wire. You can check it for continuity with an ohm meter. No continuity means the element is bad and you need to replace it--electric ...
Question about Canon PIXMA Office Equipment & Supplies
Why won't my canon printer MP460 read my ink cartridges? It keeps saying "Cannot read ink cartridges" on the black ink. Hi, are you using Canon or refilled cartridges? If you are using Canon, there's ...
clear e 5 on mp160 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.2) When the Power LED is lit, press the ...
e code 5 Hello and Welcome to FixYa! Here is some information taken from a third Party that might help you out: 1) With the printer powered off but connected to a power source, press the Power button ...
Question about Canon PIXMA Office Equipment & Supplies
canon mp160 printer E5 flashing error? any tricks to overcome this without buying new cartridges? 1) With the printer powered off but connected to a power source, press the Power button while pressing
Question about Canon PIXMA Office Equipment & Supplies
I have installed refilled cartridge but since the time i have refilled the cartridge and installed it the printer is showing error e-5 what to do.buying a new cartridge each time would be a costly ...
Question about Canon PIXMA Office Equipment & Supplies
Canon Pixma Mp810 won't turn on, any suggestions Switched it on, it started to power up - I went away and came back and it was not on. Have tried to switch it on but nothing happens. Any suggestions? ...
copier the fuse is keeps on blowing.what's the problem of my copier? Remove the fusing unit ,change the fuse on new and turn ON.If the copier worked the problem is in the fusing unit,the thermistor or
Question about Canon PIXMA Office Equipment & Supplies
LaserJet 5550dtn Printer: blows mains fuse and power supply board fuse and b... Blows mains fuse and power supply board fuse and blows power transistor on fuser power supply The fuse blows all time on
...copier will blow it's ok the blowing of the fuse lets the copier know it has a new image unit installed, you don't have to run F8 when the fuse blew the copier did that automatically . Now if you ...
1,571 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,216 Questions