...inside is truly dirty, you can gently clean the bulb. Replace the glass cover, and reverse your procedure. Plug it in, turn it on, connect it up again, and try it. It should solve your problems.
Question about Canon CanoScan Office Equipment & Supplies
...of the inside of the center track. I made sure it wasn't wet. then I used the Q-tip to clean the two bumps on both sides of the scanning wand. Put it back together and no problems since. ...
Question about Canon CanoScan Office Equipment & Supplies
I have spots on the inside glass of the scanner bed. Canoscan 8400f. Can I clean this? Thanks I use a soft photo lens cloth to clean mine. They're made not to scratch.
Question about Canon CanoScan Office Equipment & Supplies
...clean inside of glass Lock the carriage first! Remove the two medium-sized Phillips screws under the hinge and the small one over the small plastic cover plate. Remove that cover plate. Slide the top ...
Question about Canon CanoScan Office Equipment & Supplies
...Clean the inside of the glass with rubbing alcohol. Also clean the insides of the center track and the silicon bumps on both sides of the scanning wand. put a tiny amount of spray silicon on a Q-tip ...
Question about Canon CanoScan Office Equipment & Supplies
clean the inside of the glass: Gently pry off the silver "c-shaped" trim piece on the front of the scanner. Slide the silver trim pieces on each side of the scanner forward and remove them. Gently pry
...clean the glass inside, but when doing this, a small black plastic made part come out from inside and after that happend when try to start the scanner again it gives a message to unlock the scanner, ...
clean inside glass You wish to clean inside (under) the platen glass of your Canon 4200F Scanner; first I have to tell you that this is a pretty delicate operation. Make sure you see real dust with ...
...clean the inside?' 'Well, its dirty ikayak, thats why.' Ok take it apart, remember the screw sequences; that aint hard normally for scanners. Put it this way there aint any little brushes or nanobots ...
Question about Canon CanoScan Office Equipment & Supplies
inside but that is not a right solution. I decided to take scanner apart, clean scanning head and underside of glass. After all that you need calibration and scanner works like new new. I cant believe
53 questions posted
Usually answered in minutes!
391 Questions
150 Questions
139 Questions
130 Questions
108 Questions