Zanussi ZDF490 Electric Double Oven "heating control" Questions

heating elements. If the control board is faulty, the oven won't heat up. You can test the control board with a multimeter to see if it's working properly. If the control board is faulty, it will need

...control panel for diagnostics? "heating and broil elements check ok?"...by using ohmmeter I assume? next step: unplug oven or remove power source; remove back cover of oven and ohm the thermocouple ...

...control panel and the heating elements are powered by different electrical sources? Is it possible for the control panel to get power and not the heating elements? sure its possible, sounds like ...

...heating at a constant heat during the baking process. Both coils heat up during the preheat. Seems like once it heats up, the bottom coil does not heat back up. The problem looks like a faulty ...

...heating. It seems if I keep pressure on the control panel the temperature will start to rise in the oven as it should. I'm thinking that there's an issue with the circuits controlling the temperature ...

broiler element does not heat on ge jkp15bow2bb broiler element does not heat on ge jkp15bow2bb. is it the element or the control panel. the control panel was replaced 5 years ago. ck the element and ...

...heating element is out.2. The dial temp control is bad3. Only half of the breaker is on in the breaker box4 If it is digital it could be your Control panelIn most cases we first check all breakers in ...

JKP86-27 neither heating element (broil or bake) is working. Other controls and microwave work fine. having the same problem, microwave works however oven does not heat up. The controls work, I can ...

heating element, it's the control board. Is there any way to test the control board or verify this before replacing it? Any ideas of anything else it might be? Could the heating element be bad even if

...Control board or thermostat is bad? If your heating elements are not open then the issue lies with the controls and circuitry that operate the heating coils. Get yourself a schematic and trace it out ...