Zanussi ZBF260 Electric Single Oven "main fuse diagrams" Questions

Ad

Question about Zanussi Ovens

1 Answer

...Electrical Connection Pg14 is that there is no fuse as it is connected to the buildings main fuse box via a double pole switch between oven and the mains electricity. UserGuide\Manual Oven ...

Ad

...I get a wiring diagram to sort out whats wrong?? can i use 13amp socket for a electric oven you can as a get you by thing but if you look at the main fuse for the oven you will see it is a 30 amp ...

Ad

...Fuse over 175 Celcius -Baumatic BT2760SS We have a Baumatic BT2760SS oven. The main fan oven works fine if the temperature is set to a maximum of 175 celcius. However when thermastat is put over 175 ...

Question about Electrolux Ovens

1 Answer

...the 13am plug that controlls the timer clock and igniter.There is no gas coming into the oven? 240v mains powered soloniod for the oven is probably burnt the only other possibilities are the cooling ...

Question about Dacor Ovens

1 Answer

...are any replaceable fuse's. Or a resetable fuse for the heating element. If not check to see if power is getting to the main control bord. If there is power there you may need to replace the

...main terminal jumper should be 'L'1-2-3 and 'N' 4-5. The display oven I recently purchased was jumper on delivery the same as this. Unfortunately, this unit did not include a schematic that showed ...

Question about Frigidaire Ovens

2 Answers

...fuse blew, oven does not work, but top of stove does. Usually the problem is the heating element. This is easy to check and usually inexpensive. There is a video at ...

Question about Kenmore Ovens

1 Answer

fuse box off for about 20 min. and i turned it back on. still the same thing. i tried to set clock, want let me. please help. The fault code is for the ERC The ERC electronic Range Control has failed.

Question about Thermador Ovens

1 Answer

fuse or turn the breaker off, then pull the oven away from the wall and pull the plug. Turn the breaker back on and test the wall outlet. Also check the terminal block, located just inside the back of

fuse, it's ok. Cleaned the ribbon cable connecting the touchpad and control board. the display dimmed the it went out hummmm sounds the usual could be a dry bad solders on the controller pcb... as its

Not finding what you are looking for?
Zanussi ZBF260 Electric Single Oven Logo

42 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Zanussi Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...