Admiral AW22 Top Load Washer "water drips cycle done" Questions

...drips still after done filling I have a GE WHDSR315 washer with a random problem. After the tub is done filling up with water, every once in a while, water will still drip in to the tub (after the ...

...suggest to leave the door open after cycles to help evaporate the water - this is even done in top loading machines nowadays. Also clean the unit with bleach water and rinse in high temp water

cycle finishes cold water has continued dripping on to the washing after it has been spun. Originally this was cold water but now hot water is dripping as well, which is a real concern. you need a new

water drips back after clothes are done! If the water is dripping in from the area where it normally fills for a wash cycle, then you probably have a problem with the water valve. You can open them up

...water. I can use the spin/rinse cycle to get rid of it but if I'm not there, immediately after a wash cycle is done, my clothes are all wet again. your fill valve is leaking mostlikely caused by ...

Water drips continously into my washing machine even though I am not running the washer. It eventually fills up and I have to run the spin cycle to empty the washer. Why is it dripping when the washer

water keeps dripping during entire cycle even after its done washing SOUNDS LIKE YOU HAVE A BAD WATER VALVE. http://www.searspartsdirect.com/partsdirect/index.action

when the wash cycle is done very small amount of water drips into the tub. The circuit board could be at fault

cycle and continues after washing is done. How can I fix this? Water valve is bad most likely. Once the machine gets going in final spin shut off the water supply till you can get another water valve.