Compaq Presario V4000 Notebook "lost bezel" Questions

lost the inverter or the ccfl backlight bulb has burned out. The inverter would be the easiest and cheapest solution. The inverter sits behind the lcd panel under the bezel. With the V4000 series, all

...lost the screen inverter. The inverter is a small electronic board that sits under the lcd panel behind the screen bezel. It takes the DC power from the power adapter and converts into the high ...

...lost them. These plugs are connected to a black and a white (tan) wire. These wires lead through the hinges of the screen assembly and attach to metal clips at the top of the display under the bezel. ...

...determine if the problem is with the bezel or the circuit board. Usually the problem is that the bezel button is broken or has lost is springyness. A new bezel can be purchased on Ebay for around

...bezel so they don?t get lost. Remove four screws found under seals. Start remove the screen bezel with your fingers. Proceed slowly while removing the bezel. Carefully separate the display cover from ...

...lost the inverter that sits under the screen behind the screen bezel. This converter takes the low voltage from your battery or ac adapter and converts it to high voltage ac power for the backlight ...

...lost its support on left side. What Should I Do To Make The Screen Straight Again? get yourself a new set of hinges as it wont be long before the right side gives up the ghost with the extra ...

...keyboard. Others require going to a service center for a hard reset of the bios - no info will be lost on the hard drive. Also, some systems use a generic password like" "admin" or administrator

...bezel. I'm reluctant to use force without further information. Thank you. http://www.youtube.com/watch?v=CRw03PpRJfshttp://www.youtube.com/watch?v=mlpgiR1fRmolonger video Uh! Me and my mouth! ...

...bezel.  Put the screws in a safe place where they will not be lost, since you will need to use them to secure the new keyboard.Remove the screws holding the keyboard in place. The screws will ...