...the dial indicators to 80 psi? this compressor should be able to fill your tires to 80 psi. Look for a pressure switch and adjust it so the motor shuts off at a higher pressure. Do not exceed 100
Question about Ingersoll Air Tools & Compressors
...80 gal tank with a Ingersoll rand type 30 air compressors sizes 3 & 1 3/4 X 2 compressor No 30T356 it could take up to 30 minutes from zero pressure 10 to 13 minutes from 0 psi to max and ...
Question about Ingersoll Rand Air Tools & Compressors
80 gal vert tank compressor. the motor as it is filling the tank, boggs down and up many times as the tank is being filled. The rep told me to change the valve on top of the tank but that did not work
...compressor 80 gal tank. what should the start and stop pressure settings be? what is the run time to fill tank and cycle off? Hi I'm not sure but I operate my'n at about a 145/150 top and ...
...valve? pop-off valve kicks out around 80 psi compressor will not fill completely and cycle automatically like it should yes or it's opening because your gauge is dangerously off... check and make ...
6.5hp 80gallon cfm psi? MY DEAR FRIEND; GALLON IS TO MEASURE THE VOLUME,BUT CFM(CUBIC FEET PER MINUTE) IS USED FOR FLOW.AND ALSO PSI IS FOR PRESSURE.THUS THEY ARE NOT ANY WAY RELATED. IF IS IMPORTANT ...
Question about Ingersoll Air Tools & Compressors
what would cause load unload sump pressure? Is this a rotary screw unit? Was it low unloaded sump pressure? If so the most probable cause is the minimum pressure check valve located under the aluminum
...compressor that pumps and fails to build up the pressure is leaking air as it pumps. Watch the gauges as it pumps. Does it reach a certain pressure and then no higher? If you do not hear leakage when ...
8 questions posted
Usually answered in minutes!
49 Questions
42 Questions
38 Questions