Dewalt DC628K 18V XRP Cordless 15 Gauge 1-1/4-in - 2-1/2-in Angled Finish "gauge finish nailer" Questions

...then either take it back or pick up a new regulator for under $20 at Home Depot and replace the gauge you have now. Also, sometimes the gauge will have a needle tilted so that one end presses ...

...finish nailer the motor comes on when i press the trigger but it wont fire a nail any ideas why opened the front to make sure that there was no nail jammed in the guide slot and checked it with ...

How do I clear a jam? Jammed with 2 inch finish nail Hi Gary: SAFETY FIRST! Disconnect from air supply. Pull trigger to make sure not "loaded" - Here's what I would do. 1) Open magazine and remove ...

stop working.sounds like its working but doesnt go threw the whole cycle open the top gray cover to have a look and saw that the nail driver isnt going all the way to the nail to drive it out of the ...

D51275 dewalt nailer quit working It has quit working. When empty and depressed a slight amount of air is heard. Very small amount. O ring? O ring or stuck pin valve. Id check here for more info ...

Dewalt 16 ga finish nailer D51257. wont fire and no air sound wont fire and no air sound. no jamb visible debris or damaged trigger

...finish nailer will not return to start position after firing. Need to pull it back. After firing the gun, it jams and it will not return to the original starting position to continue using. You may ...

finish nailer as soon as I installed the battery the fan starts running it will not stop until I remove the battery the gun has always been properly maintained it's been clean This thing does not stop

nail gun air leak Most of the time it is a bad o-ring. Seals, gaskets, and O-rings get dry from storage and/or use without oil. Most people oil their tools before use when in fact it would be better ...