Compaq (283983-001) Motherboard "power pin" Questions

...pin power cable. Use the 20-pin connector, or add the additional 4-pin connector, to make a 24-pin ATX main power cable. ...

pin ATX main power cable,http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24[ NOTE* Color of connector on power cable, OR motherboard, does NOT matter. Proper connector, proper power

...pin and fourth pin are for the power switch. Also there is a 2 pin header above the 9 pin header that is an alternate power led header, the left pin is (+) and the right is (-). I hope this helps

pin 2 Power Led - in pin 4 Power Button # or + in pin 6 (It's no critic the orientation, it have no polarity, is a push buttom) Power Button GND or - in pin 8 HDD Led + in pin 1 HDD Led - in pin 3 GND

pin power supply connector. If you haven't already found a diagram showing the pinouts of the 20- and 24-pin power plugs, here's one borrowed from a handy site: The two plugs are essentially the same,

...of the 3 pin block. The pin closest to pin 9 is the power led + and the furthest from pin 9 is the power led -. if you need clarification, check out page 50 of the manual posted above at ...

pin #3 the power sw orange wire goes to pin #6 the power sw white wire goes to pin #8 The reset sw blue wire goes to pin #7 the reset sw white wire goes to pin #5 the power led green wire goes to pin

pin 2 Power Led - in pin 4 Power Button # or + in pin 6 (It's no critic the orientation, it have no polarity, is a push buttom) Power Button GND or - in pin 8 HDD Led + in pin 1 HDD Led - in pin 3 GND

...power pin, the HDD light and the power light are opposite each other.to make things simpler, i suggest you forget about the reset and other ones and concentrate on the power pin. bridge all the pin ...

...P5 and pin 1 is labeled. 17 15 13 11 9 7 5 3 1 . . . . . . . . . . . . . . . . . 18 16 14 12 10 8 6 4 2 Pins 1 and 3 = HD LED Pins 2 and 4 = POWER LED Pins 6 and 8 = POWER SWITCH pin 14 has no ...