...Model # 911 40188B. Buttons on front panel of oven are damaged and cannot be turned on. The timer/clock light up. I need to replace this panel, any help at finding it would be appreciated. check the ...
F5 fault code on kenmore wall oven model 911-47469 HI. This is a touch pad issue. You will need to inspect for binding of the push-buttons and control panel glass. If OK, replace the touch panel board
...wall oven model 911 4018813 and I just installed a new bake element/bottom one and it still won't heat up. Any ideas where I might look next. Thanks You will need to replace the oven control ...
...model no. 911-41185. It will not let me do anything and keeps displaying FO and beeping. Can you tell me what is wrong? F0 means no error. press cancel to clear display. If you cannot then that key ...
...it is a Kenmore wall mounted self-cleaning oven Model #911-4584690, serial #4H129484R F8 means to replace the elctronice range control board. Evidently the power failure caused damage to the
...model starts with 911. the code stands for an overtemperature condition. I would start with the temp sensor, this is the probe inside the oven cavity, part # 334300. You can ohm it out, should be ...
...model 911-30464200 kennmore wall oven Hello, Thank You for using FixYa. I will be helping you today.Im sure you wired it correct. There are 3 thermostats behind the control check them for continuity ...
...model numbers start with 911)4771, 4775, 4781, 4904, 4905, 4923* * Lower Oven Only 2T, 2V, 2Z, 3A, 3D, 3F, 3G, 3H, 3L, 3M, 3R, 3S, 3T, 3V, 3Z and that link shows the door and hinge. Recall info at ...
60 questions posted
Usually answered in minutes!
44 Questions
19 Questions
9 Questions
16 Questions