...paper begins to feed, it twists, as though it is feeding faster on the right side than the left. I have run some Epson cleaning sheets through and they now feed ok, but regular paper still twists. It ...
...paper evenly, which will make the page twist on most of the models in this series, if you pull the paper out and take a flashlight and look up the feed path you will usually see anything in the feed ...
Question about Office Equipment & Supplies
...Paper Feed Rollers. It still twists paper When printing. You need to look down inside where the paper goes, I use a flashlight and small mirror. I find things like candy,screws, gum wrappers, caught ...
Question about Dell Office Equipment & Supplies
...and it seems that the humidity was causing the problem. I concluded this because when only one sheet of paper was in the feed it printed fine, only when several sheets were present did I have a
...feed paper straight into the machine as it supposed to go, instead, it feeds only on one side. It seems that one of feeding rollers stop feeding papers. So, the paper got twisted at its roller, and ...
paper not feeding through Help...paper not feeding right. It twists before it even gets in the the printer. thanks Joan
Question about Dell Office Equipment & Supplies
...paper starts to feed, goes in about 1/4 - 1/2 inch, then twists a slight amount and the paper jam message comes on. We've tried everything. HELP! either the feed roller is slipping pls clean with ...
...paper jam message on the screen. I had this problem once in teh past, but it "self repaired". Thanks, Bob Only a couple of things I can suggest. Make sure it is sitting on the stand properly. Or if ...
feed paper correctly The paper starts to feed then it gets pulled in on the right side and the left side does not feed in. I get an error E-90 then a clear paper jam E-04 - there is not a paper jam? I
...feed but only goes in 1/4-1/2 inch, twists just a bit, then the misfeed error is displayed. Check the inside of the printer, ensure that there is no paper or foreign object stuck, sometimes they go ...
73 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions