...cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge. Eight orange flashes: Waste ink absorber ...
...cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge. Eight orange flashes: Waste ink absorber ...
...cap and tape from the BJ cartridge Open the printer's front cover. Unlock the BJ cartridge by raising the cartridge lock lever. Make sure you raise it all the way up. Remove the BJ cartridge by ...
lock lever.4. Pull out the print head from its package, then remove the orange protective cap from it.Note: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply
Question about Dell Office Equipment & Supplies
...stay on. If its the password off the router box enter it as its shown on the box including CAPS ...
Question about Dell Office Equipment & Supplies
...flashing with six orange flashes followed by one green flash on the LED. THe print head does not return to the far right hand side but stops in the middle which is the position where the ink ...
Question about Dell Office Equipment & Supplies
...cap and tape from the BJ cartridge Open the printer's front cover. Unlock the BJ cartridge by raising the cartridge lock lever. Make sure you raise it all the way up. Remove the BJ cartridge by ...
Question about Dell Office Equipment & Supplies
...cap. Do not touch the electrical contacts on the cartridge. Do not shake the cartridge. Insert the new cartridge in reverse to how you took the old one out. Push it down to lock it in place, it will ...
Question about Dell Office Equipment & Supplies
lock lever. Pull out the print head from its package, then remove the orange protective cap from it. Caution: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply ports <3>
...light starts flashing, release the button; Immediately hold down the ink-drops button for some 10-20 seconds or until the printer springs into life; Allow printer to complete it?s processing, then ...
180 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions