Dell 3100cn Laser Printer "half page vertically" Questions

and shake it gently to redistribute the toner. Try a half page test to eliminate the various stages of the image formation. The timing on this is not easy but through trial and error it can be helpful

...half print There is no error message, but only 1/2 of the page is printing when you make a copy. It splits the copy down the middle vertically. It is a scanner problem. You need to take in in for a ...

...page or 50 pages after ,(cyan,magenta,yellow) color verticals 1and half inch line comes in print . after printing 10* or 50 pages* at a time then you should off your printer for 15 minutes then ...

half the page and then stops with a 5100 error. The half page that comes out has blocks that sway out of formation, blurry blocks and a white streak down the middle. Is there any way to fix this mess?

config page literally prints half a page vertical check the paper size selected by your printer

only half the page vertically (left side), I have new drum and new toners so that is not the problem. What should I do? Check your print setup or page setup you might accidentally changed the settings

...half of the document. We tried replacing the toner cartridge... which oddly fixes the problem for about 3 pages, and then any subsequent pages print out increasingly large grey vertical lines again. ...

...half way across the page and it repeats about every 4.5 inches vertically down the page. The dent is small, about 1/8 inch diameter and about 1/64 deep. Your help is appreciated check pc drum or ...

...page to bottom & covers over half the sheet. When a color copy is done the whole page is 3or so different colors. Any help with this? Thanks People! Open the document feeder and clean the scanner ...

...page so, for example, the word "was" becomes "w as". On two or three lines also the words have been horizontally split so, for example, the top of a "y" is followed half a space later by the tail of ...