print problems with A940 dell printer my dell printer appears to be set up correctly but no ink will trasfer to the page. It prints a blank page The print-head pulls ink from the ink-cartridge, and ...
Question about Dell Office Equipment & Supplies
A940 and it will not print black or copy what is going on Black printer ink in Dell Printer may fail to be recognized by the printer. Most times an error message will be sent indicating that something
...cartridge was replaced few months ago. The printer software that came with your product should have a utility for cleaning the print heads. Try that (it is usually followed by printing a "test"
Question about Dell Office Equipment & Supplies
print a graphic with color I get blue lines throughout the illustration; printing in black & white is OK check your color cartridge and make sure you have ink in it if you do then try to clean the
Question about Dell Office Equipment & Supplies
...isn't good - replace it - or the connectors for the chip on the cartridge aren't making contact - take out the cartridge, clean the contacts (the ones on the printing head also) and try
Question about Dell Office Equipment & Supplies
...A940 printer saying both cartridges are missing but printer saying both cartridges are missing but both are present Hi there maximum time we found it is a the head problem. The print head is what the ...
cartridge in it and it still does not print color. black and white works fine what can I try to do to solve this problem. Mark Hi , the printer head head was dried up , need s to head cleaning twice ,
Question about Dell Office Equipment & Supplies
printer parts all move but paper is clean when finished printing. Recently changed a black ink cartridge Try doing an ink head clean: go into control panel - printers - properties / maintenance
Question about Dell Office Equipment & Supplies
...A940 There is a shiny steel bar inside the printer, and the ink cartridges move up and down this bar to print on the page. If this bar gets gunked up from stray ink or paper dust, then the motor ...
...clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now If that does not ...
280 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions