...belt to the right. e. Using an index finger, gently push encoder strip down and then back up, to get it back into the slot located on the back of the ink cartridge carrier. f. Gently press the strip ...
...belt: there are fine black vertical lines on this strip. If the strip gets a piece of crud on it, you get an error during the start-up sequence. Gently clean this strip with a damp lint-free tissue ...
...seat properly and lock in place. 13. Flip the large blue handle back into the down position as before we started this process. 14. Vacuum the two spots where the waste toner container port holes fit ...
...back on by applying a lot of pressure to the tweezer with your index finger. And once you do all this.....yes the "cover open" will dissappear,,,but guess what.....it wont take your paper,,,all it ...
...belt to the right. 5. Using an index finger, gently push encoder strip (Figure 1) down and then back up, to get it back into the slot located on the back of the ink cartridge carrier. 6. Gently press ...
...back out and re-seat the plastic cover. the back lug can often be put in teh V shaped metal bit by mistake. it MUST go behind the metal bit NOT in the V shape bit of metal. (you will see hat I mean ...
186 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions