Question about Kyocera Mita Office Equipment & Supplies
...in middle of copies 1/2'' thick whole page Black stripe in middle of copies Mita DC-1205 Most likely it is a bad drum cleaning blade. It will need to be replaced. This machine is old...good
...black stripe is several inches thick. I have cleaned the print-heads several times, I have also used the alignment tool several times. I think it might be a roller or a drum, but I don't know how to ...
Question about Dell Office Equipment & Supplies
...black verical stripe on the right of the paper, on the top more thick than below. Could you help me to solve this problem. Thanks in advance, Anoushka make sure all the catridges are fine and it is ...
Question about Dell Office Equipment & Supplies
thick black stripe on right edge of every page I have a 5150D that is printing a thick (at least 1/4") black stripe on the right edge of every page. Any idea on how to make it stop? Yes,.. you need to
Question about Dell Office Equipment & Supplies
...black line (about 1/4" thick") down the center of the back side of the page. If I print several pages in a row the line gets faint but is still there. After replacing the large black cartridge (#5) ...
...thick black stripes. I've tried cleaning the cylinder several times and even traded out the cartridge but nothing changed... it actually got worse. What do I do? You need to keep going deeper. ...
Question about Dell Office Equipment & Supplies
...thick black line going down the page? The stripe is consistantly close to an inch wide about an inch away from the left side of the page. I tried wiping the wiper blade and the print smear correction ...
...black (or colored) 1 inch thick series of vertical stripes down the left side of the paper about 90% of the time. (Occasionally, I get lucky and no stripe appears at all). If I'm printing more than 1 ...
Question about Dell Office Equipment & Supplies
thick black line(stripe) when scanning and copying with the hp 4315 Sounds as if you have dirty drive path for the paper. Printers are bad about ink leaking (especially if not used often) and cleaning
thick, shake cartridge up and down hard, shake it over a sink unless you want to clean ink off the floor. Now blot the nozzles of the cartridge on the paper towel, for a black cartridge you should see
598 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
441 Questions
