Question about Dell Dimension Computers & Internet
...LED, 2-wire power switch, 2-wire reset switch, and a 2-wire speaker lead. The motherboard has a 9-pin front panel connector (J9G1) and a 9-pin control panel connector (J7J2). Separate question:
Dell Dimension 9100 PC Desktop problem I have a Dell Dimension 9100, and the motherboard has 10 pin header for the optional floppy drive. I am trying to install a Dynex Internal All-in-One Card Reader
Question about Dell Dimension Computers & Internet
bios pins where is correct placement on DELL 4400 I moved jumper what two pins are right Hello here is the homepage: http://www.dell.com/support/drivers/us/en/04/Product/dimension-4400 To clear the ...
Question about Dell Dimension Computers & Internet
...connectors. Wires from the Front Panel of the computer tower, connect here) There are 2 rows of pins in that connector. Look on the motherboard real close, for a number 1 stamped near that ...
Question about Dell Dimension Computers & Internet
...configuration of the motherboard Hi, This will be found right near the CMOS battery Locate the 3-pin CMOS jumper (RTCRST) on the system board. Remove the jumper plug from pins 2 and 3. Place the ...
Question about Dell Dimension Computers & Internet
...not. Check the specs of your desktop PC here: Ports and Connectors Externally accessible: Serial 9-pin connector; 16550C-compatible Parallel 25-hole connector (bidirectional) Video 15-hole connector ...
Question about Dell Dimension Computers & Internet
...TURN ON. HOOKED UP ANOTHER POWER SUPPLY TO IT, BUT ONLY AN EMBER LIGHT CAME ONE. BUT IT WAS A 20 PIN, AND MY DELL IS A 24 PIN. you'll need to match the power supply, if it's 24-pin, you need to
Question about Dell Dimension Computers & Internet
CONNECTING PCI EXPRESS CARD 4 PIN POWER TO OCTO17 MOTHERBOARD WHERE DO i CONNECT THE 4 PIN POWER LEAD http://www.bing.com/images/search?q=4+Pin+Molex+Splitter&FORM=RESTAB
Question about Dell Dimension Computers & Internet
...and front pannel connectors front panel connectors detail most front panel connectors with a 4 x 5 pin configuration are intel compliant, and are all the same. The "nine" pin is missing, and is the ...
...battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to
453 questions posted
Usually answered in minutes!
2,074 Questions
1,169 Questions
1,075 Questions
718 Questions
514 Questions