Question about Dell OptiPlex Computers & Internet
...turn on the computer, see if the computer will "connect" to the router (that means it sees the router in computer-ish software). IF that works then connect the router to the Modem (supplied by the ...
computer will not turn on my computer does not turn on If no lights come on at all it is a power supply problem.
...Turn on the computer. During the boot process, a blue bar with www.dell.com appears at the top of the screen. 2. Immediately upon seeing the blue bar, press <Ctrl><F11>. If you do not ...
my dell computer was working properly the whole day and I turned off safely, when i came back in the morning I turned it on the power switch blinks orange and nothing works no fan no power. What I do ...
Question about Dell OptiPlex Computers & Internet
...the computer. If you are using a ps2 keyboard then turn off the computer then remove the ps2 jack and plug it again. Then turn on your computer. It will find it. Hope it helps. Please rate.
Question about Dell OptiPlex Computers & Internet
...turn computer off and re hook up monitor and computer if the moniter does not come on then yo have a defective video card, but you can test it with another monitor to be sure. normally if the monitor ...
my computer dell optiplex 330 starting light bliks orange Your computer is not POSTing, your monitor is not receiving a signal from your computer! Take a look through my published guides as they will ...
Question about Dell OptiPlex Computers & Internet
...computer can not start/display any thing except entering power save mode message when I turned on. so do you help of me that how to I solve this problem,please. turn off the comp. turn on and start ...
Question about Dell OptiPlex Computers & Internet
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
...computer and the monitor should both be off when you connect the cables. Then turn on the monitor first and set it to the correct source before turning on the computer.) I hope this helps. Cindy ...
139 questions posted
Usually answered in minutes!
848 Questions
511 Questions
428 Questions
382 Questions
349 Questions