...you for visiting FixYa Hi there, You can try reseating the Video Card of the computer and check if it will boot or not. You can also try to reseat the Memories (RAM) of the computer. Hope this
Question about Dell OptiPlex Computers & Internet
...boot the machine, does it make any beeping noises..? Usually, a single beep means all is ok. If you hear multiple beeps, then the bios is telling you about a possible fault and you should count the ...
Question about Dell OptiPlex Computers & Internet
beeps on start up. That is the correct memory module (Non-ECC). Remove all memory modules. Insert the one Samsung PC3200 module and start up. If it doesn't boot, then try a different slot. If it works
Question about Dell OptiPlex Computers & Internet
system couldnot respond after booting dell gx270 my pc goes not responding after pushing the power button on.The front panel light is solid green and on the back panel diagonistic lights gets off and ...
...try to boot from it! Take it the USB stick!17. Press F8 to run safe mode.18. See how it boots or if it does.19 restart and try to boot20. May need to run repair21. Google search how to get a repair ...
Question about Dell OptiPlex Computers & Internet
...mean there is a problem with the CPu or another component on the motherboard. A blinking yellow light indicates the power supply is receiving power from the wall, but not functioning properly. This ...
Question about Dell OptiPlex Computers & Internet
...beeps or blinking lights and notice the pattern of them (1 Long or 1Long followed by 2 Short). Maybe your power cord is bad if you don't get anything to happen whatsoever when you press the power ...
Question about Dell OptiPlex Computers & Internet
...beeps ore associated with ram memory failure ..or video card not being well plugged or being faulty ..To stat check the ram memory ..Just remove them all ..(if you have more modules) ..and after that ...
...mean that there is no display on the monitor? Do you hear a beeping sound during boot up ? If you can open you computer try to remove the RAM and try to clean it using a common eraser clean the part ...
...Boot to Utility Partition I also tried all of it and the result still the same : Strike the F1 key to continue, F2 to run the setup utility. Please help me. I don't want to reformat my pc 'cause i'll ...
83 questions posted
Usually answered in minutes!
848 Questions
511 Questions
428 Questions
382 Questions
349 Questions