Dell Dimension 5100 (D51L1) PC Desktop "replaced modem printer work" Questions

...printer, etc.) are working. From what I am understanding you are having issues connection to the Internet after your power outage. If this is the case you would need to power cycle everything, Start ...

...printer, etc. After an electrical thunderstorm a couple of days ago, the computer will not power on, but everything else on the powerstrip will. I've tried plugging it straight into the wall socket ...

...Replaced everything but the harddrive. 2. Purchased new SATA 80GB harddrive, same as the older one. 3. Installed new SATA and loaded windows XP. 4. Spent five days chasing down drivers for all the ...

modem to the pc via USB. Great ...I was back online for about 24 hours. Now it won't connect with either ethernet or usb. DSL provider says its MY computer. I've checked my USB ports with other things

...modem (if there's any), optical drive or dvd drives. just leave the motherboard, power supply and processor intact, try turning on the computer with out those components mentioned. see if you get a ...

...Printer Modem or Network cables Personal Digital Assistant (PDA) USB flash drive or other external Hard Drive Any other external devices (e.g., USB-attached devices) Remove the computer from the ...

...Replaced power supply, harddrive cables, installed a floppy because I thought I might have to flash the BIOS, when monitors are on system will also not boot from the floppy, CD or USB. I gather now ...

...printer through router. When I replace the damaged computer what do I need to do in order to maintain the network? Do I need to start all over? g1collier In regards to your network setup. As long as ...

...not power up. Checked all connections. Everything else (printer, verizon modem, monitor) that is connected to Surge Protector working. Most likely you have problem with a power box. Just replace

...modem (exact same model). Still getting the message "network cable unplugged" for the Local Area Connection, and the Link test fails in the NIC diagnostics. Is this NIC/USB problem common? Can it be ...