Question about Dell PowerEdge Computers & Internet
SCSI (channel B) in the second media bay. 2x 146gb SAS on a DELL SAS pcix card (in 2 of the hot swap bays) and an old 160gb IDE HDD (Funilly enough theres a bit towards the back of the two fans on the
Question about Dell PowerEdge Computers & Internet
that is beeping. I shut down, turned off and rebooted and it is still doing it. I have 4 lighrt slots 1-green 2-orange 3-green 4-gree Try to remove SCSI card. I had some problem, it was from scsi card
what scsi card does poweredge 4600 use Onboard SCSI RAID is the PERC 3/Di.
Question about Dell PowerEdge Computers & Internet
...scsi card, it gives me a "scanning scsi devices" in white bold text that blinks...but it never boots anything after that. Do I have the system configured properly? if my memory serves me correct i ...
...scsi controler,plus upbate the esm ,and the backplain for the server ,you should be able to locate this on the support.dell.com website.failing that if you are using a raid card this might be ...
Question about Dell PowerEdge Computers & Internet
PXE-E61 failure while booting Dell poweredge 2900 server xeon 1.6 ghz/ 8 gb/ scsi 72 gb in 6 HDD, 2 NIC cards, dvdrom, no OS Its a Network boot process ( Earlier Boot Rom ) Disable in BIOS setup or ...
Question about Dell PowerEdge Computers & Internet
SCSI 24x cd drive usb sound integrated 8mb graphics card (have) ATI Radeon 9250 PCI If this is a security concern then there is nothing to be concerned about so long as you do not plug a network cable
...the 'chuck it' decision (and taking it off Dell Support) I successfully replaced one set of ancient SCSI drives with a 2Tb SATA RAID set by removing the useless Take Drive and fitting 3 SATA's in the ...
Question about Dell PowerEdge Computers & Internet
...card.any ideas?? Have you used SCSI drives? I think it should have 80 pins. What was the SIZE of the HDD? You must have the EXACT SAME SIZE for all the Available Hard Drives. Its RAID. You must ...
Question about Dell PowerEdge Computers & Internet
...SCSI device would be a hard drive. Sound like you need to check the network cable, card, and configuration. Start by doing a simple ping. ipconfig /all is the cmd to see the settings. Then ping the ...
29 questions posted
Usually answered in minutes!
139 Questions
105 Questions
98 Questions
37 Questions
27 Questions