Dell (7W036) DVD+RW Burner "dma connected" Questions

Ad

Question about Dell Computers & Internet

1 Answer

...connected to - can take a bit of trial and error to find the right one. It should be set to "DMA if available" and the current transfer mode should be something like "DMA mode 2" ( depending on the ...

Ad

Question about Samsung Computers & Internet

1 Answer

...DMA if available Troubleshoot DVD problems Step 1: Unplug any cables that are connected a. Unplug any cables that are connected to the video outputs of the computer. b. Try to read the disc again. c. ...

Ad

Question about Sony Computers & Internet

1 Answer

DMA driver error CRC error G sonyDVD RW AD 72605 DMA driver error CRC error G sonyDVD RW AD 72605 CRC errors can occur due to many different types of problems. Some of these problems are: Damage to ...

Question about Dell Computers & Internet

1 Answer

...for this DVDRW drive and settings for IDE or Sata data transfer mode make shure it works in Ultra DMA not PIO mode. Be carefull with BIOS Setup!!! If nothing helps replace drive. Good

Question about Dell Computers & Internet

1 Answer

...connected to the middle connector, set it as a slave.Also, check the properties of your hard drive controllers (not the drives themselves) in device manager. If the advanced properties show any ...

Question about Dell Computers & Internet

1 Answer

...a 40-pin IDE cable might bring the '04/08/03 error (LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32))'. In this case, substitute to 80-pin type IDE cable is highly recommended. This kind of ...

Question about Dell Computers & Internet

1 Answer

...DMA if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the issue is resolved: ? Primary IDE channel, device 1 ? Secondary IDE channel, ...

Question about Sony Computers & Internet

1 Answer

...DMA/UDMA enabled. digital audio enabled. uninstalled/reinstalled drive. Ran Sony's drive diagnostic software and passed, have drive connected solo to secondary ide channel via 80pin cable and have ...

Question about Dell Computers & Internet

1 Answer

When I try to copy data to a DVD-R, I have a message saying, "DMA-error, crc-error"\r\n My LG DVD-R is primary IDE channel Device : 0 Transfer Mode : DMA if available Current Transfer Mode :

Question about Memorex Computers & Internet

2 Answers

...connected with the motherboard, especially if you're using USB 1.0 interface. Don't worry, they are implementing USB 3.0 right now in new computers and in a few years Intel will have an interface ...

Not finding what you are looking for?
Dell (7W036) DVD+RW Burner Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...