Konica Minolta Bizhub Press C6000 Copier "check cable connection power printer" Questions

...cable ). 2.) Check for any obstructions in side the printer. 3.) While the printer is off and cables are unplugged., press and hold the on button for 10 sec., release after 10 sec., connect the power ...

...check power and printer cable connections and retry printing". Please help me. Thanks, Guo my printer, I got error of "PC cannot send data to printer. Please check power and printer cable connections ...

cable ). 2.) Check if there's any obstructions inside the printer. 3.) While the printer is off and unplugged., press and hold the on button for 10 sec.., release after 10 sec. and connect power cable

...cable or printer driver. I would also check the PC USB port by connecting to it some flash drive. Sometimes, it's just a power glitch. By disconnecting the power cable for 1 minute and connecting it ...

...pin condition of the carriage unit Check Cable connection especially the carriage FFC Solution 3: Replace the Printhead Solution 4: Replace the power supply unit. Solution 5: Replace the logic

there is no power in my printer what can i do?/? Check your Cable Properly connected to the Printer. If cable is break it will not show Power on printer. Check another Power cable.

...Check if the error comes back. If it doesn't, reconnect your data cable(s) one at a time, checking for the error message between adding each connection. If you see the error, replace that cable. If ...

...quot;The printer is off line. Check that the printer cable is connected and printer power is on". Printer cable is connected and power is on. Computer and printer is wireless. Printer was ...

...connection(cable wireless, local, network) please supply more information generically, Have You, did you, does followed the instructions connect the cables, & to the proper sockets, installed ...

...us power cable that is ok? and also check ur usb cable which is connected with the pc. if power cable is ok then i think its ur hp power button fault. then repair ur power button. then it become ...