Dell 80GB SERIAL ATA EIDE 7200 RPM FOR THE GX270 Desktop Computer System series (DELL80GBGX270) Hard Drive "western digital hard disk jumper" Questions

...Western Digital internal hard drive as a slave drive. Hello, You should have a jumper configuration written somewhere on the front (up) side of the hard Disk ... Look there, or look just around the ...

Western Digital is usually given a choice, do not put the jumper to set the disk to a single drive / master, or you can refer to the stickers that were pasted on the hard disk thanks and regards http:

...western digitals 1TB Hard disk and it's stop working ,its fall on the ground , the blue light didn't turn on when i plug it to the power is there is anyway to fix it , if not is there is anyway to ...

...hard disk where to put the jumper to slave and another hard disk to master. but use this setting if you using one cable like IDE. but if use sata just put your sata cable to sata slot in your ...

...Western Digital hard drives I am using a PC with Windows XP as the OS. I have not been able to get my PC to recognize any portable Western Digital hard drives (Caviar brand especially). I have a hard ...

...Windows driver. Here is the Western Digital web site. http://support.wdc.com/product/download.asp?modelno=SE+WD1600AAJS+160&x=7&y=10 ...

...a 20 Gig partition instead of 200Gig. 3. the drive might be defective in that case go on the Western Digital website and download the utility to test your hard drive. WD support area for ...

hard disk is detected properly but problem was the spcific drive was not shown in my computer for wd external hard drive install drivers or check the jumper setting of exthdd one is segate HDD 40GB. i

cant read the disk If its a IDE (PATA not SATA) verify the jumpers settings and on all verify if the disk make suspect noise, try to change the data wire and return it if there are a waranty and it ...

and PATA mode , how i can resolve it plz help I would try to reseat the disk. Also, try clearing CMOS by removing the battery or repositioning the CMOS jumper. If that fails, the hard drive has failed