Creda W100FW Front Load Washer "dial washing machine broken" Questions

washing machine: It will fill and agitate in the wash cycle, but keeps agitating until I manually move the dial forward to drain. It drains, but then it keeps draining until I move the dial forward to

...dial has broken on my Zanussi WJS - 1397W. So that it no longer shows what washing setting it is on. What can I do? It washes well and I dont want to replace it. Is there a way of removing the front ...

dial to left/ counterclock wise the light to indicate what cycle is slected move to the the next cycle. Until it get to normal casual then the select light goes clock wise while i am turning the cycle

...dial by removing it and get a pair of pliers and turn it to see if the machine will spin. If this is the case you will need a new knob for your dial. If it is not spinning then your belt is broken or ...

dial will not turn, there should be one of two things wrong with it. 1) If your machine is over 10 years old, it is likely the timer/control is broken ( as in: worn out), and will need replacement. 2)

Washing machine stops at the "Rinse" setting I have to manually move the dial past the "Rinse" setting to complete the wash cycle. Needs a new programmer as the contacts in yours are worn or broken.

tub is not turning when machine is on spin The belt could be off or broken,check it out,or the dial couldbe no good,but if every other cycle works then it's probably not the dial.

...water is still half way. It stopped with no lights flashing or sound if you put the dial in the middle of any cycle and pull the dial can you hear a faint motor sound? if so its simply a broken

front loading washing machine why is there no response or readout at all on display? Assuming it's plugged it and you are turning the dials it is simply broken.

...dial on/off dial just spins around, does not turn on machine if the teeth are damaged it will have to be replaced? check to see if the knob itself is damaged and then u have to only replace the ...