Sony Grand Wega 50 in. Diagonal Class Full HD SXRD Rear Projection "remove hdmi tv screen" Questions

HDMI input. On your TV set remote are you selecting the proper input; for example when you have different devices connected to the back of your tv set, dvd player, vcr, cable box etc; you have to tell

HDMI cable from tv. 2. Unplug the tv. 3. Remove the rear (low) back cover. 4. Find the 6 pins on the board of the HDMI module and shortcut the pins no.1 and no.2 using a jumper(i use an old hard drive

...TV. I removed the switcher unit from the circuits and still nothing from the HDMI jacks I tried several combinations of the sony player, the LG DVD recorder, and Diredtv HD DVR sat receiver. I got ...

remove cable from hdmi and replace it back in it will last 5mins then screen goes blank again???? I have a LG 42PX5D-EB TV and the pc board has blown. Anyone out therr please help me find a new board.

HDMI cable from tv. 2. Unplug the tv. 3. Remove the rear (low) back cover. 4. Find the 6 pins on the board of the HDMI module and shortcut the pins no.1 and no.2 using a jumper(i use an old hard drive

tv and the entone 450 receiver.I made sure everthing was hooked up right and hdmi was activated. I replaced the hdmi cord. I can get it to work by removing the hdmi cord from the receiver and plugging

remove the screen to clean the TV? Also, is a HDMI conversion kit out there for the TV itself? I would like to get Blue-Ray and use it to the fullest extent. Wile your in there you might as well clean

...HDMI cable with no cut off. You need to make sure that the settings on your TV for the DVI connection are set properly. It sounds as if it is set to stretch or zoom. The reason the HD channels look ...

...hdmi cable, but once i put it back in it works ok but still the shadows. even when i watch a dvd through my ps3 it still has the shadows... please help........ thanks 4 your time This is due to you ...

hdmi from cable box to tv and no longer works. just shows video 7 on upper corner of screen with no picture but has audio HDMI does not like connections made with units powered and or on. Try removing