Epson Aculaser C1100 Printer "reseat duplexer" Questions

...guide on it. When duplexing,the paper comes out here, and then reenters the machine.I would try reseating the duplexer as I have had them dislodged by users sometimes when they are removing

...THANKS check for paper jam in duplexer - or it is not seated correctly. power cycle printer after reseating to re-init

...Reseat the duplexer (make sure that the printer is turned off). 3 Perform a service test. See page 213. 4 Perform a paper-path test. See page 213. 5 If the error persists, replace the duplexer (make ...

...part but still get the "Bad Duplexer Connection." All the wires are connected and I have reseated the Duplexer/Fuser mulitple times. Any suggestions would be appreciated I've worked on ...

will not duplex - fails duplex quick test Hello. Here are some suggestions from Lexmark as to why the printer will not duplex: The ability to select duplex printing requires the following: -The ...

Reseat the formatter. 2. If the printer has a duplexer installed, remove it. Turn off and turn on the printer, and see if the error clears. If the error clears, then, the duplexer PCA may be defective

Epson C1100 paper jam at E problem. My Epson C1100 had a paper jam at E problem. Looking at advice here, it seemed the solenoid was the likely problem as it was not picking up paper. I bought a new ...

...sent to the printer produces a "failed to print" window. Any suggestions? Cordially, Bob The duplexer might not be seated properly in the printer causing the carriage to jam. See if you can reseat

...single sided only from Paper Tray 1. Does not recognize installed Duplexer or Paper Tray 2. try reseating printer on top of duplexer/tray. these 6 pin connectors have a clip on each side that is

duplex print first page one side print Is the Duplex select in your menu? Try reseating the duplexer.