Epson Aculaser C1100 Printer "printing vertically using touch" Questions

...Touch 85 only prints one vertical line,then shuts off I replaced the printer tape today, and now it will only print one vertical line, then it shuts itself off. It is not even printing the correct ...

...using SP2-902-2 no.12(cross stitch). (See Service Tables - Test Pattern Printing - Section 4.2.3, pasted below.)6. Write the value of SP2-109-1 on the test pattern which was input at step 2.7. Change ...

...using SP2-902-2 no.12 (cross stitch). (See Service Tables - Test Pattern Printing - Section 4.2.3, pasted below.) 6. Write the value of SP2-109-1 on the test pattern which was input at step 2. 7. ...

...vertically thru them when I print pictures? The printer I'm using is an HP 5520 printer. Hi If you have recently changed one or more of the cartridges you may need to align the print head, the ...

black line scan series of black vertical lines on copies Sir Checking the print cartridge Image formation defects are many times the result of print cartridge problems. If there is any doubt, always ...

...vertically) 3. Now do the same to corresponding points inside printer 4. Connect power cord and power the printer 5. Test printer If problem is not resolved, try another cartridge and if printer ...

...printing to thick. see if this helps you. http://h10084.www1.hp.com/canada/portal/smb/print_expert/pi/SpencerLab_HP_CLJ2600n_vs_Samsung_CLP300N_Report.pdf you should find a replacement printhead for ...

...using the Control Panel Remove Print Smears function. 4. Did this correct the problem? Complete. Go to Step 5. 5 1. Possible weak or missing jet. Print the weak/ missing jet test print from the ...

...using and which printer model you have, select Install Color Cartridge or Install Black Cartridge or Install Photo Cartridge. Carefully remove the tape covering the printhead of the print cartridge. ...

...printing for some reason this has never happend before and I am using t he same catridge for 15 months!!! Try to reseat the print head: Reseating the print head is seldomly needed to be done. Press ...