Epson Stylus C20UX InkJet Printer "paper wont feed" Questions

...paper wont feed into printer have just been given a epson c20ux printer it seems to have installed ok but the paper wont feed in. there is plenty of paper available any help would be appreciated my ...

...single loose sheet I've tried stacks, from 10 sheets to 50 sheets, and still no luck, it wont grab the paper, I just got done printing 10 sheets of paper, and 2 of them wouldnt feed. now none will ...

...wont feed paper. PLEASE HELP!! First of all turn the printer off & disconnect all of the cables. Turn it over and give it a shake, you'll be amazed at what gets inside the feed hopper. Next try a ...

...paper wont feed! (epson 830) Hi This looks to be a problem with the paper pickup roller. Hence use a little thin Photo paper or replace the Pickup roller and also the Paper feed toller (Long black ...

Paper wont feed Recently purchased an epson sx200, and the paper will not feed and it says 'paper not loaded correctly.' After trying, I have managed to print two pages off but they were creased and i

Paper will not feed through tray on Epson Stylus c120 model B421A inkjet. there is not paper clogged in the printer but paper still wont feed re insert the ink cartridges. remove, then reinsert

...printer to go with all my ink?? please try to set it to manual feed with manual paper feed it wont search for a paper and wont give an error Thanx and i hope this helps PLease rate this ...

...paper wont feed into printer and it says i got paper jam but no visable obstruction can you help please i would Isolate the printer to know if the printer is getting the error stand alone. Disconnect ...

paper wont feed thru. Back paper tray came off my rx 500, I then found a 2" spring just sitting in that paper feed area? Dont know where to re fit it, can you help? You must open case first, dismantle

...paper jammed. wont print please help When turn on status ok, but when star to print, it feed paper then jammed? Problem with head carriage. Check chip and connector chip at carriage. Try to use ...