Epson Stylus Photo RX500 Printer "ink pad reset key" Questions

...Ink Ink Pad Error and normally your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace ...

...ink pad is at the end of their service life'. please assist me with the solution.says RAKITA Epson recommends replacing the printer, but if you want to continue using it, Epson recommends having the ...

...ink pad or fit some form of external waste ink tank, like a Printer Potty, as the pads will eventually oversaturate and start leaking waste ink out of the printer or backing up ink into the printhead ...

...are flashing both keys? this means your printer wast pad is full this can be reset without puting new pads in but ink may come out you google scc download the software and this will reset your ...

...if I do have to have the counter reset and ink pads replaced, how much $ should I expect to pay? And, where can I get it serviced? i have the reseter for your printer let me no if you need it ...

ink pad is full, status monitor tells me that service is required, all the LEDs flash and the display shows an "E". I tried to reset the WIC with ssc service utility, but the application can

Ink pad woes Worldvet, You are correct.There is a pad that comes up on the left to seal off the ink cartridges. I can see a tube that goes down underneath that contraption .There is also a long sponge

...ink pad is saturated. When I contact Epson for the patch they only provide help with Window PC's. Is there anyway I can download or repair this problem. I have a lot of leftover ink. The R300 can be ...

...ink pads and reset the waste ink counter. You can use the SSC service utility to reset the protection counter. You can download the utility from here http://inkjetprinterhelp.us/epsonSSC.html You can ...

...reset and external waste ink tank like a Printer Potty would be a far more cost effective move. For the reset, this screen cast covers the basics for setting up compatibility mode in Windows Vista or ...