Question about Epson Stylus Office Equipment & Supplies
...drive belt. To check this and repair it you will need to remove the printer top cover. Once you have done this, check that the spring assembly is intact on the left end of the drive belt. If it isn't ...
...drive belt jumping teeth on the drive roller. Turn off power to the printer and GENTLY pull the cartridge carriage back t the center using the drive belt. Next remove and re-insert the cartridges and ...
Question about Epson Stylus Office Equipment & Supplies
drive belt or sensor strip can usually be an easy task. if not take it to a qualified repair center like at a best buy and see if they cant take a look at it. You may just end up sending it for repair
drive belt for the head is going round but the head is not moving. This makes a dreadful noise and sounds worse than it is. Make sure the cartridge carrier lid is closed and not stopping the head from
the lid and check the drive belt is ok and does not have dirt on it. There are sensors you may be able to see that go over belt, check / clean them if possible. If that does not work buy a new printer
Question about Epson Stylus Office Equipment & Supplies
...drive belt is caught on something or been stretched too much and can be replaced at all. Its like at one end its caught and wont move the scanning head being stuck somehow, caught on something ...
Question about Epson Stylus Office Equipment & Supplies
...drive belt slips and gives an error Open the printer's door and look for the print carriage. It's the platform that moves back and forth over the paper, probably where you put new cartridges. Unplug ...
Question about Epson Stylus Office Equipment & Supplies
...belt drive on my Epson C62. Is there a clip that has come undone that I can re-attach? Prior to this I was experiencing a clanking noise when the carriage was at the furthest extent of its ...
...drive belt grinds away noisily for a few seconds and then the machine shuts down. Once the machine is turned off, I can slide the carriage easily by hand. Hi- Normally it will not allow you to move ...
16 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions