Epson AcuLaser 2600N Printer "reset counter replacing transfer unit" Questions

...4049-411 that also has the nu Model # C351 Enter in the service mode: Press Utility key - Meter count - Details - Counter mode - select present parts life and reset(clear) the transfer roller

reset the counter on these units but I can't find anything in the manuals. Anyone know how to do this? You need to go into tech rep mode to reset. press: stop 0 0 stop 0 1, then 0 0 0 0 0 0 0 0, press

reset the unit transfer counter and date of installation. I want change this with other unit from equal model with more life time of unit. Thanks There really isnt an easy way to do that. The transfer

reset the counter for the "transfer Unit". I went to "check consumable life" and it read empty for the transfer roller, but I don't know how to reset it once I replaced the "Image Trans model C351

...reset the counters after replacing the Transfer roller unit?. Cheers Hey, you have to go to the service menu andd under conter there is sa PM conter and life conter, and from there you have to reser ...

...reset the transfer unit counter by replacing a fuse in the transfer unit. You must have the proper fuse. There is no way to reset it using the service mode or key sequence. When the transfer unit is ...

...reset the transfer belt? printer don't work saying there's a problem with transfer belt, but I don't want to change it! thank you for your answer! Unfortunately you cannot there is a resistor on the ...

...counter resets automatically. Item # 507-1218-ND Fuser Units Fuse is wrapped in shrink wrap. Cut it out and splice in a 1/16 ma fuse. Item # F2307-ND Good Luck and Thank You for using Fixya. The ...

Transfer Unit and I do not know how to reset it so that the printer may set to 100% lifetime remaining. Can someone help me with some indication? Hold down Back and Information and turn on the printer

Maintenance TK1 TK1 Primary transfer unit counter has reached preset value or number. To correct error, replace primary transfer belt/rollers. Enter calibration/diagnostic mode and reset counter.