Question about Epson Stylus Office Equipment & Supplies
...printhead / hose How do I get to these parts to clean them or replace them? Buy them at a official EPSON service center or throw away the printer and buy a HP. Actual EPSON printers uses 5 ml ink ...
Question about Epson Stylus Office Equipment & Supplies
...printhead over the paper towel. Now, attach a short length of plastic tubing over the end of a 50ml syringe, draw up 4 ml of ammonia. place the plastic tubing over a clogged printer head port (small ...
Question about Epson Stylus Office Equipment & Supplies
...printhead. using a continous ink system's cartridge is auto reset, whenever the printer says that the cartridge is empty, it will automatically resets itself. ink refill kit comes with 100+ml of ink ...
Question about Epson Stylus Office Equipment & Supplies
...ml of ink used overall. The Lt Cyan printhead may have been damaged by the paper jam. I recommend removing all the printheads and power cycling the machine (turn off then back on) Install the ...
...printhead was not seated properly, but did not elaborate further. I have a working ML 393 right next to it, and as far as I can tell, both print heads are seated exactly the same. What am I missing? ...
Question about Epson Stylus Office Equipment & Supplies
...printhead area on cart will be flooded with ink. Removing couple of ml from cart will stop it leaking. 2) If the cart looks clean (not leaking), stamp the printhead on some folded tissue paper or ...
...ml 2855 but it is still displaying toner low. Is there anything else I should be doing other than changing over the cartridges To solve the printing problem.. # Hold the cartridge upside down, with ...
...printhead is filled with 8 ml ink After disassembly - clean the printhead with fluid compatible with pigment ink (for black color) or compatible with water based ink (color printheads) during ...
...printhead cleaning solution by 1:10 for the C/Y/M colors only. You can refill an amount of 11 ml (1 ml cleaning solution + 10 ml ink) into the C/Y/M ones and an ink-only of 20 ml into the bk one. In ...
Question about Epson Stylus Office Equipment & Supplies
...characters when printing w/our okidata - 395 the top part of the characters are cut off. Does the printhead need replaced? Tina Yes quite possible pin broke on head, check ribbon is fitted
140 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions
